Hardware Installation; Driver Installation - Exsys EX-1452IS Manual

Usb 3.2 gen1 isolation adapter with 3kv optical isolation

Hide thumbs Also See for EX-1452IS:

Table of Contents

Available languages

English

4. Hardware Installation

Because there are large differences between PC's, we can give you only a general in-

stallation guide. Please refer your computer's reference manual whenever in doubt.

1. Use precautionary measures to discharge static electricity! Before installation, remo-

ve possible static discharge potentials from all objects with which the insulator could

come into contact. This can be done, for example, by touching a bare metal housing

rail after switching off the power supply.

2. Now connect the EX-1452IS with the included USB cable and the other end of the

cable to the USB port on your PC.

3. Now connect the devices to the EX-1452IS.

4. If desired, now install the wall mounting kit or the optionally available DIN-Rail Kit on

the EX-1452IS.

All Operating Systems

After the hardware installation the OS will recognize the device automatically and install

the drivers.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „USB-Controller" the following

new entry's:

If you see this or a similar information the device is installed correctly.

EX-1452IS

Table of Contents

Do you have a question about the EX-1452IS and is the answer not in the manual?