14.
Lock air cap with retaining ring.
15.
Select spray pattern by adjusting the fluid knob
and pattern selection knob. The air control ad-
justs the TOTAL air to the pattern and gun.
Note: If fluid is not atomizing properly, fluid may need to be thinned further, or a different tip size may be used.
16.
Hold gun perpendicular, 6–8 inches from surface. Move
gun first, then pull gun trigger to spray.
Air cap
Round Pattern
Set knob to RND
Vertical Pattern
Set knob to FAN
Horizontal Pattern
Set knob to FAN
Nozzle
Retaining ring
air control
pattern selection
knob
fluid knob
309317
9