53-1004105-13 Hardware Installation Guide
•
Local CP state (slot number and CP ID), warm or cold, recovering or recovered.
•
Remote CP state (slot number and CP ID).
•
High Availability (enabled or disabled).
•
Heartbeat (up or down).
•
Health of standby CP.
•
HA synchronization status.
The following is an example of haShow output:
chassisX6:admin> hashow
Local CP (Slot 1, CP0): Active, Warm Recovered
Remote CP (Slot 2, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
Note the following about this output:
•
A warm recovery typically does not disrupt traffic flow.
•
A cold recovery is usually a result of a reboot of the active CP, which disrupts traffic.
•
A lack of HA synchronization can be related to a firmware download in progress or that the device is recovering from a
reboot or power-cycle.
historyShow
Use the historyShow command to display the entire history log, which includes insertion and removal events for field-
replaceable units (FRUs), such as blades, power supplies, fans, and world wide name (WWN) cards.
The following is an example of historyShow output:
chassisX6-8:admin> historyshow
CORE BLADE
Slot 7
Factory Part Number:
Factory Serial Number:
POWER SUPPLY
Unit 1
Factory Part Number:
Factory Serial Number:
POWER SUPPLY
Unit 2
Factory Part Number:
Factory Serial Number:
(output truncated)
SW BLADE
Slot 3
Factory Part Number:
Factory Serial Number:
FAN
Unit 1
Factory Part Number:
Factory Serial Number:
FAN
Unit 2
Factory Part Number:
Factory Serial Number:
(output truncated)
Broadcom
Inserted at Mon Jun 13 13:58:38 2016
60-1003323-01
DYH0339L00D
Inserted at Mon Jun 13 13:59:09 2016
23-0000163-01
DUE2M03M04P
Inserted at Mon Jun 13 13:59:09 2016
23-0000161-01
DUC2M35L0CL
Inserted at Mon Jun 13 13:59:12 2016
60-1003336-01
EAL0338L006
Inserted at Mon Jun 13 13:59:13 2016
60-1003203-03
DYL0329L014
Inserted at Mon Jun 13 13:59:13 2016
60-1003203-03
DYL0329L01A
Brocade X6-8 Director
Hardware Installation Guide
53-1004105-13
89
Need help?
Do you have a question about the Brocade X6-8 Director and is the answer not in the manual?