Table of Contents
Advertisement
•
Perform scheduled lubrication as specified in
the Maintenance Section.
•
Inspect the oil level in gearbox and replenish if
needed. A low oil level is a warning sign that
the gearbox may be cracked or its seal is
damaged and needs to be replaced.
•
Ensure all gearbox vents are in place and free
from clogs.
•
If the fan must be removed from the gearbox,
antiseize must be added to the shaft prior to
installation. OPS-SB-0029
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
•
Ensure hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinder in place and are
secured with pins.
•
Check for hydraulic oil leaks on the cylinder,
along the hydraulic lines, and at tractor
hydraulic ports.
IMPORTANT: DO NOT use your hands to check
for oil leaks. Use a piece of heavy paper or
cardboard to check for hydraulic oil leaks. OPS-
SB-0030_D
SBX-75/87 04/19
© 2019 Alamo Group Inc.
OPERATION
(SG-14)
Operation Section 4-23
Advertisement
Table of Contents
