Table of Contents
Advertisement
•
Ensure the augers and 4 paddle fan are in
good working condition and rotate freely.
•
Ensure chute ring is rotating freely.
•
Ensure the driveline integral shields are in
good condition and rotate freely.
•
Inspect that all bolts and screws are in position
and are properly torqued.
•
Check blade wear and if worn reverse it or
replace. OPS-SB-0027_A
Do not put hands or feet near the rotating fan. Fan contact can result in
serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material,
performing service, and making repairs.
Do Not put hands or feet near the rotating auger. Auger contact can
result in serious injury or even death. Stay away until all motion has
stopped and the snow blower is securely blocked up before removing
material, performing service, and making repairs.
•
Ensure the deflector chute shield is in good
condition.
•
Ensure drum UHMW is not damaged and
drum rotates freely.
•
Ensure the drive chain shield is in place and in
good repair.
•
Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-SB-0028_D
SBX-75/87 04/19
© 2019 Alamo Group Inc.
OPERATION
(SSB-6)
Operation Section 4-22
(SSB-5)
Advertisement
Table of Contents
