6. SKID STEER REQUIREMENTS
Skid Steer Requirements and Capabilities
•
ASABE approved Roll-Over Operator Protective Structure and Seatbelt.
•
Operator Protective Door .............................. Contact authorized skid steer dealer for equipping unit with
•
Skid Steer Warning Equipment ..................... Slow Moving Vehicle (SMV) emblem, proper lighting
•
Hitch .............................................................. Universal Mount, Quick Hitch
•
Front Auxiliary Hydraulics.............................. Implement drive motors must be matched with the hydraulic
•
Implement Drive Motors (Minimum) .............. SBX-75 15GPM, SBX-87 18GPM
Recommended .............SBX-75 18GPM, SBX-87 24GPM
6.1 Operator Protective Structure and Seat Belt
A Roll-Over Operator Protective Enclosure and seat belt are essential to protect the operator from falling off
the skid steer, especially during a roll over where the driver could be crushed and killed.
Operate this Equipment only with a Power Unit equipped with an
approved operator Roll-Over Protective Structure (ROPS). Always
wear seat belts. Serious injury or even death could result from falling
off the Power Unit--particularly during a turnover when the operator
could be pinned under the Operator Protective Structure.
6.2 Operator Protective Door
The skid steer must be equipped with an Operator
Front Protective Door. Serious injury or death can
result from a thrown object hitting an unprotected
operator. Contact the skid steer manufacturer or an
authorized dealer for this protective feature.
SBX-75/87 04/19
© 2019 Alamo Group Inc.
OPERATION
operator protective door.
output capacity of the skid steer
Operation Section 4-10
(SPU-14)