Figure 5: Emergency Number Configuration - Grandstream Networks UCM6 Series Manual
Ip pbx emergency calls
Hide thumbs
Also See for UCM6 Series:
- Service manual (47 pages) ,
- Manual (31 pages) ,
- Basic configuration manual (29 pages)
Table of Contents
Advertisement
To configure emergency numbers, users need to follow below steps:
1. Navigate on the web GUI under "Call Features → Emergency Calls".
2. Click on
to add a new emergency number.
3. Configure the required fields "Name, Emergency Number, Trunk(s) to be used to reach the number
and Members Notified".
4. Set the Emergency level for the number (ex:
Significantly Urgent
was used for 911 on this case)
5. Save and apply the configuration.
Figure 5: Emergency Number Configuration
P a g e
|
10
UCM6xxx Emergency Calls Guide
Advertisement
Table of Contents
