Adding Emergency Numbers; Figure 4: Activate Alert Events - Grandstream Networks UCM6 Series Manual

Adding Emergency Numbers

On this section we provide the steps to configure the different emergency numbers
that users in company ABC are allowed to dial and set the priority for each one as
described on the requirement sections.
We assume that the admin has already configure the trunks and inbound/outbound
routing policy to send calls to the external networks (PSTN and ITSP). If you need
details about those configurations you can check the following how to guides:
•
Managing Outbound and Inbound calls on UCM.
•
SIP Trunk Configuration Guide.
•
Analog Trunk Configuration Guide.

Figure 4: Activate Alert Events

UCM6xxx Emergency Calls Guide
P a g e | 9