Programming; Working With The Display Menu - KBR multicount 3D6-0-LCD-EP-US1 Operating Instructions, Technical Parameters

7

Programming

Programming of the energy meter multicount 3D6-0-LCD-EP-.../3D6-1-LCD-ES-... is done using the 4
W
X V Q
keys
,
, and
7.1

Working with the display menu

Pressing the navigation key
the menus will be switched through with a new menu being activated every 0.5 seconds.
b
Note
Active energy for
low tariff
Menu
Active energy W for high tariff
Act
Continue in basic menu
X
or
X W
or
Continue with
back to basic menu
X W
or
Continue with
back to basic menu
Back to main menu
X W
or
Active energy W for Low tariff
Act
(multicount 3D6-1-LCD-ES-...
only)
Version 2.00
.
W
jumps to the respective following menu item. If the key
The active tariff is displayed by permanent flashing of the
respective tariff display T1 or T2 in each display menu.
!
§
LC-Display
!
2345. g
W
!
to jump
!
to jump
!
789. 5
2345. g
§
Wh Display of the accumulated active energy
in low tariff
2. 3 5
The tariff display T2 (low tariff) lights up
permanently
The tariff display T1 flashes, i.e. the
current counting tariff is T1 (high tariff).
Unscaled unit
Wh kWh if the prefix LED "k" lights up. (if the
prefix LED "G" or "M" lights up, other
menus are available)
For meter count detailed view
Wh Detailed view giga-watt hours
2
GWh if the prefix LED "G" is active
Wh Detailed view mega-watt hours
45g
MWh if the prefix LED "M" is activet
Wh Detailed view kilo-watt hours
kWh if the prefix LED "K" lights up
Wh kWh if the prefix LED "k" lights up. (if the
prefix LED "G" or "M" lights up, other me-
nus are available)
User Manual multicount
W
is kept depressed,
Page 13 of 34