Outdoor Unit Installation - Pioneer CB009GMFILCFHD Service Manual

14.2.1.3 Install the main body
① Ceiling installation (The only installation
method for the unit with drain pump)
Remove the side board and the grille.
Locate the hanging arm on the hanging screw bolt.
Prepare the mounting bolts on the unit.
Put the side panels and grilles back.
② Wall-mounted installation
Hang the indoor unit by insert the tapping screws
into the hanging arms on the main unit. (The bottom
of body can touch with floor or suspended, but the
body must install vertically.)

12.3 Outdoor unit installation

12.3.1 Service space for outdoor unit
Air inlet
More than 30cm
(11.81in)
Air inlet
Air outlet
More than 60cm
(23.62in)
12.3.2 Bolt pitch
61
(Wall or obstacle)
More than 30cm(11.81in)
Maintain channel
More than 60cm
(23.62in)
More than 200cm(78.74in)