Pioneer CB009GMFILCFHD Service Manual page 121

assembly 8) Screw off the 4 screws
9) Take out the water
Remove the 1) Remove the panel
10
draining
2) Remove the electronic
pump
3) Remove the water
4) Disconnect the drain
5) Release 2 screws to
inside 4 holes (1 is under
a protection cover) to
remove the water
collecting assembly.
collecting assembly
control box
collecting assembly
pipe.
remove the pump
supporter. Be careful of
the connection wires.
Repeat the operation of No.2
Repeat the operation of No.6
Repeat the operation of No.9
118