Remove The Grille; Console Indoor Unit Installation - Pioneer CB009GMFILCFHD Service Manual

The body's lower part should sink into the
ceiling for 10~12 mm. In general, L is half of the
screw length of the installation hook.
Locate the air conditioner firmly by wrenching
the nuts after having adjusted the body's
position well.
12.2.2.5 Install the panel

Remove the grille

Hang the panel to the hooks on the mainbody.
Tighten the screws under the panel hooks till
the panel closely stick on the ceiling to avoid
condensate water.
Hang the air-in grill to the panel, then connect
the lead terminator of the swing motor and that
of the control
terminators on the body respectively.
Note: The panel shall be installed after the
wiring connected.

12.2.3 Console indoor unit installation

14.2.1.1 Service space for indoor unit
59
box with corresponding