Ceiling-Floor Unit Installation - Pioneer CB009GMFILCFHD Service Manual

12.2.3.2 Install the main body
 Fix the hook with tapping screw onto the
wall
 Hang the indoor unit on the hook.
(The bottom of body can touch with floor or
suspended, but the body must install vertically.)

14.2.1 Ceiling-floor unit installation

14.2.1.1 Service space for indoor unit
12.2.1.2 Bolt pitch
① Ceiling installation
Capacity
(Btu/h)
24K
36K
48K
② Wall-mounted installation
3.4.1Install the pendant bolt
① Ceiling installation
Select the position of installation hooks according
to the hook holes positions showed in upper picture.
Drill four holes of Ø12mm, 45~50mm deep at the
selected positions on the ceiling. Then embed the
expansible hooks (fittings).
② Wall-mounted installation
Install the tapping screws onto the wall.(Refer to
picture below)
60
D E
983 220
1200 220
1565 220