Pioneer CB009GMFILCFHD Service Manual page 119

3) Pull out all the
4) There are 2 buckles
6 Remove the 1) Open the grille
electronic
control box
2) Remove the electronic
3) Pull out all the plugs or
4) Remove the electronic
7 Remover 1) Repeat the operation of
the fan
wheel
2) Remove the ventilation
connection wires to other
parts, then the PCB can
be replaced.
fixing the PCB. To draw
out the PCB, you should
open them.
control box cover
connectors connected to
the electronic control
box
control box
Remove the 2 screws to
disassemble the electronic
control box
No.5
ring
Release the 4 screws to
disassemble it.
RY2
Pump
Water lever
Power Input
Repeat the operation of step1 of No.1(No need
to take down the panel)
Repeat the operation of step 2 of No.5
116
Indoor fan
Temp. sensors
Swing motor
Display board
2 screws
4 screws