Endless Pools FASTLANE POOL Owner's Manual page 24

P5/8/08
Water Quality System
Filter
After 24 hours of filtering following the addition of chlorine, bleed off any air at
"
the filter and note the pressure on a test log sheet.
If the pool has been contaminated with any debris during installation, you may
"
wish to clean or exchange the cartridge filter at this time.
Typically, the cartridge should be removed or replaced when the filter pressure
"
rises 5 psi above starting pressure.
In indoor installations and with little to moderate use, this may only be once
"
every few months.
The filter pressure should be checked every two weeks.
"
Heater (Optional)
It is very important that you read the heater literature before operating the
"
heater.
During the initial 24-hour start-up period, you may turn on your heater to
"
bring the pool up to your desired temperature.
Place the included (8) no diving into pool/keep children supervised at all times
stickers on all four (4) sides of your pool on the inside and outside top rail area of your
liner, before using the Fastlane Pool.
NO DIVING into the Fastlane Pool.
Please keep children supervised at ALL times!
Endless Pools is an industry leader in customer service.
Should you have any questions about or need assistance with your Fastlane Pool,
please call our Customer Service Department at 1-800-910-2714.
Page 24 of 26
PLACARDING YOUR FASTLANE POOL