Preparing The Vehicle For Riding On Wet And Muddy Circuits; Preparing Vehicle For High Temperatures Or Slow Riding - KTM 150 EXC TPI 2021 Owner's Manual

8 PREPARING FOR USE
8.7
8.8
42

Preparing the vehicle for riding on wet and muddy circuits

M01106-01
600868-01

Preparing vehicle for high temperatures or slow riding

M01129-01
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the KTM PowerParts fitting instructions.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Straighten the bent radiator fins carefully.
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
p. 143)
1.8 bar (26 psi)