Attachment To The Tractor; Bolting The Frame Mounting Bracket To Your Tractor; Measuring Your Tractor And Setting The Frame Length - Schulte FM-350 Operator's Manual

Attachment to the Tractor

Bolting the Frame Mounting Bracket to your Tractor

Bolt the frame mounting bracket to your tractor frame using the bolts supplied. Any special instructions will be
included with your, tractor specific, mounting frame.

Measuring your Tractor and Setting the Frame Length

Set the tractor drawbar length. Set dimension 'B' as follows:
Measure the length of your tractor. Measure
dimension 'A', from the frame mounting plate where
it contacts the tractor to the center of the hitch pin.
Record this dimension.
Disconnect hydraulic hose and remove bolts so that the inner and outer frame can be slid in and out. Set the
frame length as follows:
Snow Blower / Plow Model and
Tractor PTO Type
1000 RPM, 1-3/8-21, SDX-110, SDX-117
1000 RPM, 1-3/4-20, SDX-110, SDX-117
1000 RPM, 1-3/8-21, SDX-960
1000 RPM, 1-3/4-20, SDX-960
1000 RPM, 1-3/8-6, SDX-960
ALL TRACTORS, V-PLOW
FM-350 10/14
© 2014 Alamo Group Inc.
ASSEMBLY
Tractor PTO Type
1000 RPM, 1-3/8-21
1000 RPM, 1-3/4-20
540 RPM, 1-3/8-6
Assembly Section 3-2
Dimension 'B'
16"
20"
14"
Dimension 'C' Dimension 'D'
'A' plus 8-1/4"
'A' plus 6-3/4"
'A' plus 8-1/4"
'A' plus 5-3/4"
'A' plus 8-3/4"
'A' plus 7-3/4"
23-1/2"
22"
23-1/2"
21"
24"
---