Attachment to the Tractor
Bolting the Frame Mounting Bracket to your Tractor
Bolt the frame mounting bracket to your tractor frame using the bolts supplied. Any special instructions will be
included with your, tractor specific, mounting frame.
Measuring your Tractor and Setting the Frame Length
Set the tractor drawbar length. Set dimension 'B' to 14".
Measure the length of your tractor.
Measure dimension 'A', from the frame mounting
plate where it contacts the tractor to the center of
the hitch pin. Record this dimension.
Loosen bolts that clamp the inner and outer frames, but DO NOT REMOVE THEM, so that the frames can
slide in and out.
Set the frame length Dimension 'C' to the previously
recorded 'A' plus 4-1/2".
FM-115 07/15
© 2015 Alamo Group Inc.
ASSEMBLY
Assembly Section 3-2