Attention Owner/Operator - Schulte FM-350 Operator's Manual

Attention Owner/Operator

BEFORE OPERATING THIS MACHINE:
1. Carefully read the Operator's Manual, completely understand the Safety Messages and instructions, and
know how to correctly operate both the tractor and implement.
2. Fill out the Warranty Card in full. Be sure to answer all questions. Make sure to record the Serial Number of
the implement. Mail within 30 days of the delivery date of this implement.
NOTE: Warranties are honored only if completed "Owner Registration and Warranty" forms are mailed to
Schulte Industries Ltd. within thirty days of delivery of the implement.
3. Record the FM-350 Front Mount Frame's model number and serial number on the warranty page at the front
of the this Operator's Manual. Keep this information as part of the permanent maintenance file for the
implement.
The FM-350 Front Mount Frame's employs shear bolts to protect the driveline. The specified shear bolts are
listed below.
340-6802
340-6803
340-825
340-826
340-8804
NOTE: Both length and grade are important in this
specification. For example M10 X 60 Grade 6.8
indicates a metric bolt 10mm in diameter, 60 mm
long of grade 6.8.
IMPORTANT: Replacement of a shear bolt with one
of a grade, length or diameter other than the
specified shear bolt will be considered unauthorized
modification and warranty will be void.
Refer to the "Maintenance" section of this Operator's
Manual for help in properly identifying these grades
of bolts.
Refer to your Snow Blower operator's manuals for
shear bolts used to protect the snow blower cross
auger.
FM-350 10/14
© 2014 Alamo Group Inc.
INTRODUCTION
For 1000 RPM PTO tractors
1-3/8 Z21 For SDX-960 or RDX-960
1-3/4 Z20 For SDX-960 or RDX-960
1-3/8 Z21 For SDX-110, SDX-117 or RDX-110
1-3/4 Z20 For SDX-110, SDX-117 or RDX-110
For 540 RPM PTO TRACTORS
1-3/8 Z6 For SDX-960 or RDX-960
Introduction Section 2-4
M10 X 60 Grade 6.8
M10 X 60 Grade 6.8
M10 X 50 Grade 8.8
M10 X 50 Grade 8.8
M10 X 60 Grade 6.8