Managing The Central Heating; Switching The Central Heating On/Off; Changing The Room Temperature Temporarily (Override) - DeDietrich ESSENCIO CF 22 User Manual

Oil/gas-fired boiler
Table of Contents

Advertisement

Tab.16
Type of access
Direct access: from the main home screen
Quick access: from any screen
Tab.17
Operating mode
Programming
Manual
Temporary temperature change
Holiday
Frost protection
6.3

Managing the central heating

Tab.18
Type of access
Direct access: from the main home screen
Quick access: from any screen
7740500 - v02 - 12022021
1. Go to the menu: Operating mode.
Access path
→ Select the page corresponding to the required zone
→ Select: Operating mode
Not available
2. Select the desired operating mode using the
Description
The room temperature is modulated according to the timer programme chosen.
The domestic hot water is produced according to the timer programme chosen.
Recommended mode.
The room temperature is constant.
The domestic hot water temperature remains at the comfort temperature permanently.
The room temperature is forced for a defined period.
The production of domestic hot water is forced at the comfort temperature for a defined
period.
The room temperature is reduced during an absence period to save energy.
The domestic hot water temperature is reduced during an absence period to save ener­
gy.
The installation and equipment are protected against frost during the winter period.
3. Select: Confirm, to save the new operating mode.
4. Go back to the main screen by pressing the back key
6.3.1

Switching the central heating on/off

The heating function can be switched off for all circuits.
This can lead to energy savings, for example, during the summer period.
1. Go to the menu: Central heating On/Off.
Access path
→ Press the selector
→ Select: Central heating On/Off
→ Press the
→ Select: Central heating On/Off
2. Select the desired value:
Off to stop the heating function.
On to switch the heating function on again.
3. Select: Confirm, to save the setting.
4. Go back to the main screen by pressing the back key
6.3.2

Changing the room temperature temporarily (override)

Regardless of the operating mode selected for a zone, it is possible to
modify the room temperature for a defined period. Once this time has
elapsed, the selected operating mode will restart.
key
6 Settings
selector:
.
.
CFU
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Essencio cf 29

Table of Contents