Advertisement
Attach Camera to Back Box
b. Adjust the sun shield.
Loosen the two screws on the shield
hood.
Move the sun shield forward or
backward.
Tighten the two screws.
c. Aim the camera.
While supporting the camera with
your hand, loosen the three locking
screws and adjust the camera's pan,
tilt, and rotation.
d. Make sure that the toothed surfaces
are properly aligned and meet
evenly. Then, use the T10 torx
wrench to securely tighten each
locking screw.
CB-6404/CB-6408 QIG Rev 100
This document does not contain any export-controlled information.
Mounting Complete
February 2021
Advertisement
