Operating instructions SPEEDY F1
37 Appendix: Inspection lists
Initial inspection: after 6 weeks
Check all screws/fastening elements are firmly seated
Check wheel tracking and drive wheel bearing are firmly
seated (tightening torque 70 Nm)
Checking and replacing, if necessary, the plastic protective
hose on the ram bar
Functional and safety check of the anti-tipping supports
and further functional assemblies (such as the foldable
backrest, for example)
OK / carried out = OK | not OK = not OK | resolved = the fault was corrected
Comments:
Stamp:
Date / Signature
OK /
not OK
carried out
resolved
40