Infrared Bullet Network Camera
User Manual
3.1 Installation Preparation
When installing the camera, you may require the following tools and accessories listed
in Table 3-1. You need to prepare only listed tools as accessories are delivered with the
camera.
Table 3-1 Installation tools
Tool
Cross screwdriver (self-provided)
Claw hammer (self-provided)
Impact drill (self-provided)
Spirit level (self-provided)
L-Wrench (delivered with the camera)
Self-tapping screw (delivered with the
camera)
Expansion particle (delivered with the
camera)
Issue V1.0 (2016-02-22)
3
Device Installation
Appearance
3 Device Installation
5