Advertisement
INSTALLATION AND ADJUSTMENT
Attaching the Unit
Step 1:
Adhere the guide pattern
to the installing surface.
Step 2:
Drill three small holes on
the surface.
Step 3:
Swivel Dome Cover
counterclockwise to
separate from Camera
Body Cover.
Step 4:
Swivel Camera Body
Cover counterclockwise
to separate from the
Camera Base.
Step 5:
Remove the Inner
Dome Cover and screw
the Camera Base with
Camera onto the ceiling
Step 6:
Rotate the main bracket
to adjust the desired pan
angle.
EG-4
Main Bracket
Advertisement
