Table of Contents
Advertisement
28
Changing settings
◦ Reset device settings to factory default...: This setting will affect all camera settings,
including regional settings. Saved images will not be affected. The camera will be
restarted and you will be prompted to set the regional settings.
◦ Reset image counter...: This setting will reset the numbering of the image file-
names. To prevent image files being overwritten, the new counter value will be
based on the highest existing filename number in the image archive.
Note When a reset option is selected, a dialog box is displayed with more informa-
tion. You can choose to execute the reset action or to cancel.
• Camera information: This submenu displays information about the camera. No
changes can be made.
◦ Model.
◦ Serial number.
◦ Part number.
◦ Software: The version of the software.
◦ FPGA: The version of the FPGA firmware.
◦ Storage: The used and free space on the memory card.
◦ Lens: The field of view of the lens.
◦ Battery: The remaining battery capacity (in percent).
◦ Register camera...: This will start the registration wizard. For more information, see
section 7 Register the camera, page 11.
◦ Licenses: Open-source license information.
#T559954; r. AT/65353/65353; en-US
108
Advertisement
Table of Contents
