Table of Contents
Advertisement
28
Changing settings
◦ Image overlay information: This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 11.5
Image overlay information, page 28. You can select the following information to
display:
– Compass.
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: The screen brightness slider is used to control the brightness
of the screen.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 11.4 Swipe-down menu, page 28.
◦ Viewfinder brightness: This setting defines the brightness of the viewfinder. Avail-
able options are Low, Medium, and High.
◦ HDMI: (Applicable when an HDMI cable is connected to the camera.) This setting
defines the resolution of the digital video output. The setting can be used to select
display of the image only, or display of the image and the entire overlay graphics.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
◦ Compass: This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 13.17 Calibrating the compass, page
50.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an
image is saved.
◦ Disable all: This setting is used to disable the camera lamp, laser, and flash
function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
Available choices are Off, 5 min, and 20 min.
• User interface options: This submenu includes the following settings:
◦ Manual adjustment using touch: This setting is used to enable/disable the touch
functionality for manual image adjustments. For more information, see section 16.3
Adjusting the infrared image, page 60.
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 16.3 Adjusting the infrared image, page 60.
◦ Emissivity mode: This setting specifies how the measurement parameter emissivity
will be entered. Available options are Select values and Select from materials table.
For more information, see section 16.6 Changing the measurement parameters,
page 66.
◦ Screening mode: This setting is used to enable/disable screening mode. For more
information, see section 24 Screening alarm, page 99.
• Reset options: This submenu includes the following settings:
◦ Reset default camera mode...: This setting will affect the image mode, color palette,
measurement tools, and measurement parameters. Saved images will not be
affected.
#T559954; r. AT/65353/65353; en-US
107
Advertisement
Table of Contents
