Related Manuals for Noblelift SPM1516
Summary of Contents for Noblelift SPM1516
- Page 1 SPM15-SMS-001_EN WARNING Do not use the stacker before reading and understanding this operating instructions. NOTE! Keep for future reference. Operating Instructions SPM1516, SPM1525, SPM1530, SPM1529A...
-
Page 2: Technical Specifications
Welcome to use our electric stacker. Your stacker is made of high quality steel and SPED mast and was designed to give a durable, reliable and easy to use product. For your safety and correct operation, please carefully read this instruction book and warnings on the stacker before using it. This Operation Instruction of the stacker is edited for you to completely acquire and master the safety operation of the stacker. -
Page 3: Technical Data
Technical Data Model of manufacture SPM1516 SPM1525 SPM1530 SPM1529A Drive: manual manual manual manual (electric-battery or mains,diesel,petrol,fuel gas,manual) Type of operation pedestrian pedestrian pedestrian pedestrian (hand,pedestrian,standing,seated,order picker) Load capacity / rated load Q (kg) 1500 1500 1500 1500 Load centre distance... -
Page 4: Safety Guidance
Residual Capacity at different lifting height Up to h3 mm ACTUAL CAPACITY ( Q ) kg 1500 1500 2500 1500 3000 Load centre distance ( C ) 2 SAFETY GUIDANCE 2.1 Operator should read all warning signs and instructions here and on the stacker before using it. 2.2 Do not operate a stacker unless you are familiar with it and have been trained or authorized to do 2.3 Do not operate a stacker unless you have checked its condition. -
Page 5: How To Charge Storage Battery
3.3 Lubrication Use motor oil or grease to lubricate all movable parts. 3.4 Maintenance of battery: Keep all the screw caps on each cell battery dry and clean. Each connecting terminal and cable terminal should be tightened and painted with clean grease. The exposed connecting terminal and connecting rod of battery should be covered with anti-slip insulated cover. -
Page 6: Troubles Shooting
6 TROUBLES SHOOTING Trouble Clause Fixing Methods The forks can not be -The hydraulic oil is not enough. -Pour in the oil. up the max. height. The forks can not be -Without hydraulic oil. -Fill in the oil. lifted up.(Motor -The oil has impurities. -
Page 7: Circuit Diagram
7 Hydraulic Flow Diagram 8 Electric Wires Diagram 8.1 CIRCUIT DIAGRAM... -
Page 8: Connection Diagram
8.2 CONNECTION DIAGRAM...