Advertisement
mini-B connector on the TWR-K40D100M
module. Allow the PC to automatically
configure the USB drivers if needed.
Tilt the
3
Board
Tilt the board side to side to see the
LEDs on D8, D9, D10 and D11 light up
as it is tilted.
Navigate the
4
Segment LDC
The segment LDC will display the seconds
elapsed since boot-up. Press SW2 to
toggle between viewing the seconds,
hours and minutes, potentiometer and
temperature.
Explore
5
Further
Explore all of the features and capabilities
of the preprogrammed demo by reviewing
the lab document located at
freescale.com/TWR-K40D100M.
Learn More About
6
Kinetis K40 MCUs
Find more MQX
RTOS and bare-metal
™
labs and software for the Kinetis 40 MCUs
at freescale.com/TWR-K40D100M.
freescale.com
5
Advertisement
