Safety Information - EdilKamin Idrotech Installation, Use And Maintenance Manual

Dear Sir or Madam,
thank you for choosing our IDROTECH stove.
Before using your stove, please read this booklet carefully so that you may exploit all its features to the full in complete safety.
Please remember that the 1st ignition must be carried out by the dealer, which verifies the installation and completes the guarantee.
The manufacturer cannot be held liable for any damage deriving from stove use following incorrect installation, incorrect maintenance
or misuse.

SAFETY INFORMATION

THE STOVE MUST NEVER BE RUN WITHOUT WATER IN THE SYSTEM.
"WATERLESS" IGNITION DAMAGES THE STOVE.
The stove is designed to heat water through the automatic combustion of pellets in a firebox.
The only risks which may derive from using the stove are linked with non-compliance with the installation instructions, direct con-
tact with live electrical parts (inside) or with the fire or hot parts, and the introduction of foreign substances.
If components fail, the stove is fitted with safety devices which shut it down. This must be allowed to happen without interference.
For correct operation, the stove must be installed in compliance with the instructions herein, and the door must not be opened during
operation: combustion is managed automatically so no manual operations are needed.
Never put foreign substances in the firebox or hopper.
Do not use flammable products to clean the smoke duct.
Firebox and hopper components must only be cleaned WHEN COLD using a vacuum cleaner.
The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.
During stove operation, the outlet pipes and door reach high temperatures.
Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.
NEVER use liquid fuels to light the stove or rekindle the embers.
Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.
Do not wet the stove, and do not put wet hands near electrical parts.
Do not fit reducers on the smoke outlet pipes.
The stove must be installed in a suitable place as regards fire safety, and provided with all the facilities (power supply and outlets) it
requires for correct safe operation.
DECLARATION OF CONFORMITY
The undersigned EDILKAMIN S.p.A. with registered office in C.so Porta Romana 116/a –20122 Milan - Fiscal codes P.IVA
00192220192
Declares under its own responsibility as follows:
the wood pellet stove specifi ed below is manufactured in accordance with the 89/106/CEE Directive (Construction Products)
WOOD PELLET STOVE, trademark ITALIANA CAMINI, called IDROTECH
MODEL: IDROTECH SERIAL NO.: Ref. data tag plate
YEAR OF PRODUCTION: Ref. data tag plate
Compliance with the 89/106/EEC Directive is also determined by compliance with the European standard:
EN 14785:2006 as shown in test report 30-6467 issued by:
STROJIRENSKY ZKUSEBNI USTAV, s.p., BRNO, Ceska republika, organismo notificato 1015
The undersigned also declares as follows:
the IDROTECH wood pellet stove complies with the requirements of the following European directives:
2006/95/CEE – Low voltage directive
89/336/CEE – Electromagnetic compatibility directive
EDILKAMIN S.p.A. declines all responsibility for malfunction of the equipment in the event of substitution, assembly and/or
alterations of any sort carried out by personnel not working for or authorised by EDILKAMIN.
- 20
-