Ignition 2bright Pint TW200 IP User Manual page 73

Symptom
The unit does not work, no
light.
No response to the DMX con‐
troller.
If the procedures recommended above do not succeed, please contact our Service Center. You
can find the contact information at www.thomann.de.
Remedy
Check the mains connection and the fuse.
1. Check the DMX ports and cables for proper connection.
2. Check the address settings and the DMX polarity.
3. Try using another DMX controller.
4. Check to see if the DMX cables run near or alongside to
high voltage cables that may cause damage or interfer‐
ence to DMX interface circuits.
Troubleshooting
2bright Pint TW200 IP
73
LED PAR