Ignition 2bright Pint TW200 IP User Manual page 38

Operating
Enabling keylock
2bright Pint TW200 IP
38
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Auto Lock' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to choose between 'On' (keylock on) and 'Off' (keylock off).
4.
Press [ENTER] to accept the selection.
Simultaneously press [UP] and [DOWN] for 5 seconds if you want to activate the input while the
keylock is activated.