Ignition 2bright Pint TW200 IP User Manual page 42

Operating
Resetting the device to factory
defaults
2bright Pint TW200 IP
42
LED PAR
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Service' . Confirm with [ENTER].
3.
Press [UP] or [DOWN] repeatedly until the display shows 'Reset' . Confirm with [ENTER].
ð You are prompted to enter a password.
4. Enter the password 11.
5.
Press [ENTER].
ð The device is reset to factory default settings.