Setting fan mode
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Fan Mode' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select the desired fan mode.
The following sub menus are available:
Menu level 3
'Smart'
'Silent'
'Max'
4.
Press [ENTER] to accept the selection.
Function
The fan speed is controlled automatically depending on the
device temperature.
The fan is off (silent mode). The device temperature is controlled
by reducing the power consumption to a maximum of 70 W.
The fan runs at maximum speed.
Operating
2bright Pint TW200 IP
39
LED PAR