Ignition 2bright Pint TW200 IP User Manual page 30

Operating
Setting the DMX address
2bright Pint TW200 IP
30
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'DMX Address' .
Confirm with [ENTER].
2.
Use [UP] or [DOWN] to select the desired DMX address between '001' and '512' .
3. Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX. Make sure that this number
matches the configuration of your DMX controller. The following table shows the highest pos‐
sible DMX address for the various DMX modes.
Mode
1-channel
2-channel, variant A
2-channel, variant B
3-channel
Display
'1CH'
'2CH A'
'2CH B'
'3CH'
Highest possible DMX address
512
511
511
510