Ignition 2bright Pint TW200 IP User Manual page 40

Operating
LED repetition rate (PWM)
2bright Pint TW200 IP
40
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'PWM Rate' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to select the value for the LED repetition rate. The following table
shows the available options.
Menu level 3
'900Hz'
'1000Hz'
'1100Hz'
'1200Hz'
'1300Hz'
'1400Hz'
'1500Hz'
Function
PWM 900 Hz
PWM 1.0 kHz
PWM 1.1 kHz
PWM 1.2 kHz
PWM 1.3 kHz
PWM 1.4 kHz
PWM 1.5 kHz