Ignition 2bright Pint TW200 IP User Manual page 34

Operating
Setting display illumination
2bright Pint TW200 IP
34
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'Settings' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] repeatedly until the display shows 'Backlight' . Confirm with
[ENTER].
3.
Use [UP] or [DOWN] to choose between 'On' (display permanently on) and 'Off' (display
turns off after a few seconds in case of inactivity).
4. Press [ENTER] to accept the selection.