Setting the DMX mode
Mode
5-channel, variant A
5-channel, variant B
9-channel
1.
Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'DMX Mode' .
Confirm with [ENTER].
2.
Use [UP] or [DOWN] to select the desired DMX mode (1, 2, 3, 5, or 9 channels). Depending
on the selected mode, the display shows '1CH' , '2CH A' , '2CH B' '3CH' , '5CH A' , '5CH B' or
'9CH' .
3.
Press [ENTER] to accept the selection.
This setting is only relevant when the device is controlled via DMX.
Display
'5CH A'
'5CH B'
'9CH'
Operating
Highest possible DMX address
508
508
504
2bright Pint TW200 IP
LED PAR
31