Ignition Pure UV 710 User Manual
  1. Manuals
  2. Brands
  3. Ignition Manuals
  4. DJ Equipment
  5. Pure UV 710
  6. User manual

Ignition Pure UV 710 User Manual

Led par
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Pure UV 710
LED PAR

Advertisement

Table of Contents
loading

Related Manuals for Ignition Pure UV 710

Summary of Contents for Ignition Pure UV 710

  • Page 1 Pure UV 710 LED PAR...
  • Page 2 Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 30.07.2020, ID: 477698...

  • Page 3: Table Of Contents

    Starting up..............................23 Connections and operating elements................... 26 Operating..............................30 7.1 Starting the device........................... 30 7.2 Main menu............................30 7.3 Menu overview..........................40 7.4 Functions in 1-channel DMX mode................... 41 7.5 Functions in 2-channel DMX mode................... 41 Pure UV 710 LED PAR...
  • Page 4 Table of contents 7.6 Functions in 4-channel DMX mode................... 42 Technical specifications........................44 Plug and connection assignments....................46 Troubleshooting............................47 Cleaning............................... 49 Protecting the environment......................50 Pure UV 710 LED PAR...
  • Page 5 Pure UV 710 LED PAR...

  • Page 6: General Information

    Our products and user manuals are subject to a process of continuous development. We there‐ fore reserve the right to make changes without notice. Please refer to the latest version of the user manual which is ready for download under www.thomann.de. Pure UV 710 LED PAR...

  • Page 7: Further Information

    Our online guides provide detailed information on technical basics Online guides and terms. Personal consultation For personal consultation please contact our technical hotline. If you have any problems with the device the customer service will Service gladly assist you. Pure UV 710 LED PAR...

  • Page 8: Notational Conventions

    Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Pure UV 710 LED PAR...
  • Page 9 This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in material and environmental damage if it is not avoided. Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Pure UV 710 LED PAR...
  • Page 10 General information Warning signs Type of danger Warning – suspended load. Warning – danger zone. Pure UV 710 LED PAR...

  • Page 11: Safety Instructions

    Extend the life of the device by regular breaks in operation and avoid switching it on and off frequently. This device is not suitable for continuous use. Pure UV 710 LED PAR...
  • Page 12 Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. Pure UV 710 LED PAR...
  • Page 13 Eye damage caused by high light intensity Never look directly into the light source. WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. Pure UV 710 LED PAR...
  • Page 14 NOTICE! Risk of fire Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames. Pure UV 710 LED PAR...
  • Page 15 Dust and dirt inside can damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by qualified service personnel at regular intervals to prevent overheating and other malfunction. Pure UV 710 LED PAR...
  • Page 16 NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. Pure UV 710 LED PAR...
  • Page 17 PVC floor and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad floor protectors or a carpet. Pure UV 710 LED PAR...

  • Page 18: Features

    For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. Pure UV 710 LED PAR...

  • Page 19: Installation

    Secure the barn door with a safety cable on the spotlight after installation. The safety cable must run outside the barn door and must not interfere with the light emission. Pure UV 710 LED PAR...
  • Page 20 When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand. Pure UV 710 LED PAR...
  • Page 21 Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be attached to the bracket. Pure UV 710 LED PAR...
  • Page 22 Installation Please note that this device must not be connected to a dimmer. Pure UV 710 LED PAR...

  • Page 23: Starting Up

    Starting up Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Pure UV 710 LED PAR...
  • Page 24 Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W). Pure UV 710 LED PAR...
  • Page 25 Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on. Pure UV 710 LED PAR...

  • Page 26: Connections And Operating Elements

    Connections and operating elements Connections and operating elements Overview Pure UV 710 LED PAR...
  • Page 27 2 Operating buttons [MENU] Calls up the main menu or a submenu. Increases / decreases the displayed value by one. [ENTER] Confirms a selected value. 3 Display 4 Locking screw for the brackets 5 Barn doors Pure UV 710 LED PAR...
  • Page 28 Connections and operating elements Rear panel Pure UV 710 LED PAR...
  • Page 29 Lockable output socket (Power Twist) for the power supply cable to the next device (maximum output current 16 A) 10 [POWER IN] Lockable input socket (Power Twist) for the power supply cable 11 Fuse holder Pure UV 710 LED PAR...

  • Page 30: Operating

    When the display shows the desired parameter or value press [ENTER] to enter the respective submenu or confirm a new value. To return to the previous menu level without changes, press [MENU]. Pure UV 710 LED PAR...
  • Page 31 2-channel mode and 4-channel mode (display shows ‘1CH’ , ‘2CH’ or ‘4CH’ ). When the display shows the desired value press [ENTER] to confirm the selection. Make sure that this number matches the configuration of your DMX controller. Pure UV 710 LED PAR...
  • Page 32 [ENTER] to confirm the selection. This setting is only relevant if the device is not controlled via DMX. The device can operate in stand-alone mode or control connected devices of the same type, that must be configured as slaves. Pure UV 710 LED PAR...
  • Page 33 ‘On’ to rotate the display by 180 °. Use the arrow buttons to select ‘Off’ to rotate the display to the default position. When the display shows the desired value press [ENTER] to con‐ firm the selection. Pure UV 710 LED PAR...
  • Page 34 Use the arrow buttons to select ‘On’ to permanently activate the backlight of the dis‐ play. Use the arrow buttons to select ‘Off’ to permanently deactivate the backlight of the dis‐ play. When the display shows the desired value press [ENTER] to confirm the selection. Pure UV 710 LED PAR...
  • Page 35 ‘Emergency Light’ If the DMX control fails, an emergency Light kicks in. Press one of the arrow buttons repeatedly until the display shows the desired value. Press [ENTER] to confirm the selection. Pure UV 710 LED PAR...
  • Page 36 ‘ Linear’ Linear course ‘ Exponential’ Exponential course ‘Logarithmic’ Logarithmic course ‘S Curve’ S-curve shaped course Press one of the arrow buttons repeatedly until the display shows the desired value. Press [ENTER] to confirm the selection. Pure UV 710 LED PAR...
  • Page 37 The dimmer setting for LED is activated. ‘Halogen’ The imitation of the dimming behaviour for incandescent light is activated. Press one of the arrow buttons repeatedly until the display shows the desired value. Press [ENTER] to confirm the selection. Pure UV 710 LED PAR...
  • Page 38 Press [MENU]. Press one of the arrow buttons repeatedly until the display shows ‘System Info’ . Press [ENTER]. Press one of the arrow buttons repeatedly until the display shows ‘Firmwre’ . Press [ENTER]. The display shows the currently used firmware version. Pure UV 710 LED PAR...
  • Page 39 Press [MENU]. Press one of the arrow buttons repeatedly until the display shows ‘System Info’ . Press [ENTER]. Press one of the arrow buttons repeatedly until the display shows ‘Operation Hours’ . Press [ENTER]. The display shows the number of operation hours. Pure UV 710 LED PAR...

  • Page 40: Menu Overview

    Operating 7.3 Menu overview Pure UV 710 LED PAR...

  • Page 41: Functions In 1-Channel Dmx Mode

    Dimmer (0 % to 100 %) 7.5 Functions in 2-channel DMX mode Channel Value Function 000… 255 Dimmer (0 % to 100 %) 000… 005 LEDs on 006… 250 Strobe effect, speed increasing from 1 Hz to 20 Hz Pure UV 710 LED PAR...

  • Page 42: Functions In 4-Channel Dmx Mode

    080 … 102 Random Strobe effect, increasing speed 103 … 127 Interrupt effect, 5 s to 1 s 128 … 250 Strobe effect, speed increasing from 1 Hz to 20 Hz 251 … 255 LEDs on Pure UV 710 LED PAR...
  • Page 43 128 … 255 Dimming behaviour incandescent light Dimmer curves 000 … 005 Without function 006 … 063 Linear course 064 … 127 Exponential course 128 … 191 Logarithmic course 192 … 255 S-curve shaped course Pure UV 710 LED PAR...

  • Page 44: Technical Specifications

    Input connections Voltage supply Lockable input socket (Power Twist) DMX control XLR chassis plug, 3-pin Output connections Voltage supply Lockable output socket (Power Twist) Output current 16 A max. DMX control XLR chassis socket, 3-pin Pure UV 710 LED PAR...
  • Page 45 Dimensions (W × H × D) 125 mm × 125 mm × 230 mm Weight 3.5 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 50 %, non-condensing Further information Type Rechargeable battery opera‐ tion Pure UV 710 LED PAR...

  • Page 46: Plug And Connection Assignments

    The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) Pure UV 710 LED PAR...

  • Page 47: Troubleshooting

    Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Pure UV 710 LED PAR...
  • Page 48 DMX interface circuits. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Pure UV 710 LED PAR...

  • Page 49: Cleaning

    The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a reg‐ ular basis. Before cleaning, switch off the device and disconnect mains-operated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. Pure UV 710 LED PAR...

  • Page 50: Protecting The Environment

    Dispose of this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility. Pure UV 710 LED PAR...
  • Page 52 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents