Ignition 2bright Pint TW200 IP User Manual page 44

Operating
Firmware version display
LED operating hours display
2bright Pint TW200 IP
44
LED PAR
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2.
Press [UP] or [DOWN] until the display shows 'Firmware' .
ð The current firmware version is displayed.
1. Press [MENU] and then [UP] or [DOWN] repeatedly until the display shows 'System Info' .
Confirm with [ENTER].
2. Press [UP] or [DOWN] until the display shows 'LED On Time' .
ð The operation hours of the LED are displayed.