Chevrolet Cruze Manual page 77

at 5000 km since the last oil change.
Remember to reset the oil life system
whenever the oil is changed.
Display of remaining engine oil life
The remaining engine oil life duration
is displayed in the Driver Information
Center by the control indicator I,
followed by a percent value which
shows the remaining engine oil life.
For this purpose the ignition has to be
switched on without engine running.
Driver Information Center 3 85.
Service Information 3 233.
Instruments and controls
How to reset the engine oil life system
Reset the system whenever the
engine oil is changed so that the
system can calculate the next engine
oil change. To reset the engine oil life
system, do one of the following:
■ Using a scan tool:
Your workshop will reset the
system using this tool after
changing the engine oil.
■ Using accelerator pedal:
◆ Remove key from ignition switch
or with Start/Stop system switch
off ignition for more than one
minute.
◆ Insert key in ignition switch and
turn key to position 2 or with Start/
Stop system switch on ignition
(ignition on but with engine off).
◆ Fully press the accelerator pedal
and hold for two seconds.
77
◆ Release the accelerator pedal for
two seconds.
◆ Repeat pressing and releasing of
the accelerator pedal as
described above two times within
one minute.
■ Using the SET/CLR button on
vehicles with Midlevel-Display:
Press the MENU button on the turn
signal lever to select the Vehicle
Information Menu. Turn the
adjuster wheel until the menu with
the remaining engine oil life
duration is displayed. Press
SET/CLR button for a few seconds
with ignition on. If CodE 82 still
appears in the Driver Information
Center after the vehicle has been
started, the engine oil life system
has not been reset. Repeat the
procedure.
Control indicators
The control indicators described are
not present in all vehicles. The
description applies to all instrument
versions. When the ignition is