Chevrolet Cruze Manual page 140

140 Infotainment system
Connecting a mobile phone saved in
the device list
Select the desired mobile phone and
then select the option Select in the
menu displayed.
As soon as the Phone system has
detected the mobile phone, the
connection setup can be confirmed.
The mobile phone can be operated
via the Phone system.
Note
If the device fails to connect, check
to ensure the device lists the vehicle
phone system. If it does not, delete
the device from the device list and
reconnect as a new device.
Removing mobile phone from device
list
Select the desired mobile phone from
the device list. In the menu displayed
select Delete and confirm the
subsequent message.
Adjusting the ring tone
To change the ring tone
characteristic:
Press CONFIG button.
Select Phone settings and then Ring
tone.
Select the desired option.
To change the ring tone volume:
While the phone rings turn the m knob
of the Infotainment system or press
the buttons + / - on the steering wheel.
Resetting the mobile phone to factory
settings
Select Phone settings and then
Restore factory settings.
Operation
Introduction
As soon as a connection via
Bluetooth has been set up between
your mobile phone and the
Infotainment system, you can also
operate many functions of your
mobile phone via the Infotainment
system.
Via the Infotainment system, you can,
e.g., set up a connection to the
telephone numbers stored in your
mobile phone or change the
telephone numbers.
Note
In the handsfree mode mobile phone
operation continues to be possible,
e. g. taking a call or adjusting the
volume.