Bulb Replacement - Chevrolet Cruze Manual

Hide thumbs Also See for Cruze:
Table of Contents

Advertisement

both the windshield and the blades
with a good cleaner or mild detergent.
Rinse them thoroughly with water.
Repeat the process, if necessary.
There is no way to remove traces of
silicone from glass. Therefore, never
apply polish with silicone to your
vehicle's windshield or you will get
streaks which will impair the driver's
vision.
Do not use solvents, gasoline,
kerosene, or paint thinner to clean
wipers. These are harsh and can
damage the blades and painted
surfaces.
Wiper blade on the rear window
Lift wiper arm. Disengage wiper blade
as shown in illustration and remove.
Attach the wiper blade slightly angled
to the wiper arm and push until it
engages.
Lower wiper arm carefully.
Vehicle care
195

Bulb replacement

Switch off the ignition and switch off
the relevant switch or close the doors.
Only hold a new bulb at the base! Do
not touch the bulb glass with bare
hands.
Use only the same bulb type for
replacement.
Replace headlight bulbs from within
the engine compartment.
Note
After heavy, driving rain or washing,
headlight and taillight lenses could
appear frosty.
This condition is caused by the
temperature difference between the
lamp inside and outside.
This is similar to the condensation
on your windows inside your vehicle
during the rain and doesn't indicate
a problem with your vehicle.
If the water leaks into the lamp bulb
circuitry, have the vehicle checked
by a workshop.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents