Chevrolet Cruze Manual page 222

222 Vehicle care
Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
prevents it from slipping.
Attach jack handle and with the
jack correctly aligned rotate
handle until wheel is clear of the
ground.
Variant 2:
6. Unscrew the wheel nuts.
7. Change the wheel.
8. Screw on the wheel nuts.
9. Lower vehicle.
10. Install the wheel wrench ensuring
Set the jack to the necessary
height. Position it directly below
the jacking point in a manner that
11. Align the valve hole in the wheel
prevents it from slipping.
Attach wheel wrench and with the
jack correctly aligned rotate wheel
wrench until wheel is clear of the
ground.
that it locates securely and tighten
each nut in a crosswise
sequence. Tightening torque is
140 Nm
cover with the tyre valve before
installing.
Install wheel nut caps.