4. Turn signal light (1)
Tail light/brake light (2)
5. Rotate bulb holder anti-clockwise.
6. Remove bulb holder. Push bulb
into socket slightly, rotate anti-
clockwise, remove and renew
bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and
engage.
8. Switch on ignition, operate and
check all lights.
Reverse light
Have bulb replaced by a workshop.
Vehicle care
203
Fog tail light
Have bulb replaced by a workshop.
Station wagon
1. Open both covers.