Chevrolet Cruze Manual page 199

5. Rotate bulb holder anti-clockwise
and remove.
6. Push bulb into socket slightly,
rotate anti-clockwise, remove and
renew bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Install tail light assembly in body
and tighten screws. Refit the inner
panelling with both pins.
8. Switch on ignition, operate and
check all lights.
Light assembly in the tailgate
1. Remove both pins by using a
screw driver and open the trim.
Vehicle care 199
2. Unscrew three screws by using a
8 mm spanner or socket wrench.