Chevrolet Cruze Manual page 201

2. Unscrew both screws.
3. Remove tail light assembly. Take
care that the cable duct remains in
position.
4. Reverse light (1)
Turn signal light (2)
Tail light/brake light (3)
Vehicle care 201
5. Rotate bulb holder anti-clockwise.
6. Remove bulb holder. Push bulb
into socket slightly, rotate anti-
clockwise, remove and renew
bulb.
7. Insert bulb holder into the tail light
assembly and screw into place.
Install tail light assembly in body
and tighten screws. Close covers
and engage.
8. Switch on ignition, operate and
check all lights.
Light assembly in the tailgate
Rear fog light/Reverse light,
depending on the side.