Chevrolet Cruze Manual page 147

The selected setting is indicated by a
LED in the button.
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Demisting and defrosting the
windows V
■ Push button V: fan automatically
switches to higher speed, the air
distribution is directed
automatically to the windscreen,
■ Switch on cooling n.
■ Set temperature control to warmest
level.
■ Switch on heated rear window Ü.
■ Open side air vents as required and
direct them towards the door
windows.
Note
If the settings for demisting and
defrosting are selected, an Autostop
will be inhibited.
If the settings for demisting and
defrosting are selected while the
engine is in an Autostop, the engine
will restart automatically.
Heated rear window Ü 3 37.
Air recirculation system 4
The air recirculation mode is operated
with the 4 button.
9 Warning
Driving with recirculation mode for
prolonged period of time can make
you sleepy. Periodically turn to the
outside air mode for fresh air.
Climate control 147
The exchange of fresh air is
reduced in air recirculation mode.
In operation without cooling the air
humidity increases, so the
windows may mist up. The quality
of the passenger compartment air
deteriorates, which may cause the
vehicle occupants to feel drowsy.
Cooling n
Operated with the n button and is
functional only when the engine and
fan are running.
The air condition system cools and
dehumidifies (dries) when outside
temperature is a little above freezing
point. Therefore condensation may
form and drip from under the vehicle.
If no cooling or drying is required,
switch the cooling system off to save
fuel. When the cooling system is
switched off, no engine restart will be
requested by the climate control
system during an Autostop.