Chevrolet Cruze Manual page 205

Light assembly in the tailgate
1. Open the tailgate and remove the
cover on the respective side.
2. Remove the bulb holder by
turning anti-clockwise. Replace
the bulb by pushing it slightly into
the socket and rotating
anticlockwise:
Rear fog light/Reverse light (1),
depending on the side.
Tail light (2).
3. Insert bulb holder and turn
clockwise. Attach cover.
4. Switch on ignition, operate and
check the lights.
Side turn signal lights
Version with bulbs on the fender
1. Push light towards the back of the
vehicle and remove.
2. Rotate bulb holder anti-clockwise.
3. Pull bulb out of the bulb holder and
renew.
4. Reinstall in reverse order.
Vehicle care 205
Version with Light Emitting
Diode (LED) in the exterior
mirrors
LEDs can not be changed. Consult a
workshop in case of defective LED.
Number plate light
4-doors
There are two variants for 4-doors
available.
4-doors, variant 1
1. Insert screwdriver in bulb
housing, press to the side and
release spring.