Chevrolet Cruze Manual page 105

Lighting features
Entry lighting
Welcome lighting
Headlights, sidelights, tail lights and
interior lights are switched on by
unlocking the vehicle with the remote
control for a short time. This function
facilitates retrieving the vehicle when
it is dark.
The lighting switches off immediately
when the ignition is turned to the
accessory position.
Activation or deactivation of this
function can be changed in the menu
Settings in the Info-Display. Vehicle
personalisation 3 93.
The settings can be stored by the key
being used 3 23.
Entrance lighting
The following lights will additionally
switch on when driver's door is
opened:
■ Some switch lights
■ Some interior lights
Exit lighting
Headlights, sidelights and tail lights
illuminate the way for an adjustable
time after leaving the vehicle.
Note
Entry lighting and exit lighting can be
switched on or off automatically
depending on how dark it is outside.
Switching on
The following process is only applied
to vehicles that do not have an
automatic light function. The light
switch has to be in position OFF. If the
Lighting 105
driver's door is closed, the lights will
be switched off automatically after the
set time.
1. Switch off ignition.
2. Remove ignition key.
3. Open driver's door.
4. Pull turn signal lever.
5. Close driver's door.
If the driver's door is not closed the
lights switch off after two minutes.
The lighting is switched off
immediately if the turn signal lever is
pulled while the driver's door is open.
When the light switch is in position
AUTO and the key is removed after
the ignition has been switched off, the
exterior light of the vehicle that has
the auto light function will be turned
on automatically depending on the
darkness.
Activation, deactivation and duration
of lighting of this function can be
changed in the menu Settings in the
Info-Display. Vehicle personalisation
3 93.