Allen-Bradley 1606-XLS240-UPSC Reference Manual page 5

• Superior battery management for long battery life
• Temperature compensated battery charging
• Comprehensive diagnostics and monitoring functions
• Replace battery signal included
• Electronically overload and short circuit protection
• 50% power reserves
• Selectable buffer time limiter
The power supply is also environmentally friendly:
• The unit does not release any silicone and is suitable for the use in paint
shops.
• The unit conforms to the RoHS directive 2002/96/EC.
• Electrolytic capacitors included in this unit do not use electrolytes such as
Quaternary Ammonium Salt Systems.
• Plastic housings and other molded plastic materials are free of halogens.
• The materials that are used in our production process do not include
Polychlorinated Biphenyl (PCB), Pentachlorophenol (PCP),
Polychlorinated naphthalene (PCN), Polybrominated Biphenyl (PBB),
Polybrominated Biphenyl Oxide (PBO), Polybrominated Diphenyl Ether
(PBDE), Polychlorinated Diphenyl Ether (PCDE), Polybrominated
Diphenyl Oxide (PBDO), Cadmium, Asbestos, Mercury, or Silica.
Attribute
Input voltage
Range
Output current
Output voltage
Integrated battery
Temperature range
Size (W x H x D)
Buffer time
Figure 1 - Typical Setup of a DC-UPS System with the 1606-XLS240-UPSC
Rockwell Automation Publication 1606-RM003A-EN-P - March 2019
DC-UPS with Integrated battery - 24V, 10 A
Description
24V DC, nom
22.5...30V DC
15 A, min
10 A, min
Typ 0.23V lower as input voltage
22.25V
12V, 5 Ah
° °
0...40 C(32...104 F)
123 x 124 x 11 mm
(4.84 x 4.88 x 0.43 in.)
16 minutes, 15 s, typ
16 minutes, 15 s, typ
(For example, PLC)
–
Normal mode
Buffer mode
Normal mode
Buffer mode, 10 A
VRLA lead acid
Operational
–
5 A load
10 A load
5